Category: Power Dividers & Combiners
Practical power dividers & combiners guides with product links, examples and specification checks.
-
RF Combining Phase: Why Equal Signals May Cancel
Coherent signals combine according to amplitude and phase, not just arithmetic…
-
What Is an RF Power Divider?
An RF power divider distributes an input signal among multiple outputs…
-
Measuring a Two-Way RF Divider with a VNA
Measure input match, each transmission path and output isolation with the…
-
Why a Two-Way Splitter Has About 3 dB Division Loss
An equal two-way split sends one half of the input power…
-
Power Splitter Troubleshooting: Unequal Output Levels
Check cable, connector, load and sensor differences before concluding that the…
-
RF Divider Isolation: What It Means
Output-port isolation describes how strongly a signal entering one output couples…
-
Specifying a Divider for an Antenna Feed Network
An antenna feed network needs the required division ratio, power handling,…
-
Can an RF Splitter Be Used as a Combiner?
Some passive reciprocal dividers support combining, but permissible power and behavior…
-
RF Divider Procurement Checklist
Specify port count, division ratio, full band, impedance, connectors, insertion-loss convention,…
-
RF Splitter Phase Balance Explained
Phase balance describes the difference in phase between output paths under…