Description
100 W UHF RF Dummy Load – DC–1 GHz, 50 Ω
The CentronRF 100 W UHF (PL-259/SO-239) dummy load (RF termination) is a 50-ohm coaxial load rated for 100 watts of average input power from DC–1 GHz, with VSWR ≤1.2. It turns your transmitter’s output into heat instead of radiating it, so you can test, tune and align equipment without going on air or risking damage to the final amplifier.
It is a good fit for transmitter tuning, amplifier testing and base-station maintenance. The UHF (PL-259 / SO-239) connector is the standard on CB, marine and amateur HF/VHF transceivers, so it fits most radios without an adapter.
Key features
- 100 W average power handling
- Broadband DC–1 GHz operation
- Low VSWR ≤1.2 for an accurate 50 Ω match
- UHF male connector
Applications
- Tuning HF/VHF/UHF amateur and commercial transceivers
- Testing RF power amplifiers and repeaters
- Base-station and DAS commissioning and maintenance
- Production test and burn-in of RF equipment
Specifications
| Product | RF dummy load / coaxial termination |
|---|---|
| Model | MANTU10001M |
| Frequency range | DC–1 GHz |
| Impedance | 50 Ω |
| Average input power | 100 W |
| VSWR | ≤1.2 |
| Connector | UHF male |
FAQ
What is an RF dummy load used for?
A dummy load replaces the antenna during testing. It presents a clean 50 Ω load to the transmitter and absorbs the power, so you can adjust and measure the radio without transmitting a signal.
Is a 100 W load right for my transmitter?
Choose a load rated at or above your transmitter’s maximum output power. This load is rated for 100 W average power from DC–1 GHz.
Why buy from CentronRF
CentronRF is the official global e-shop of Centron Microwave Components, the maker of the RF POWER, Milcom and Microwave Centron brands. You buy direct from the factory, and our team can help you choose the right part or quote custom versions and volume orders. Contact us at [email protected] or on WhatsApp +86 131 6872 5545.
Featured Reviews
