Category: Electronics Manufacturing & RF Test
Production RF fixtures, station correlation, troubleshooting and accessory purchasing for electronics manufacturers.
-
How to Validate a Power-Amplifier Production Load Path
A power-amplifier load path should provide the specified termination and measurement…
-
Wi-Fi Module Manufacturing: RF Test Coverage and Interpretation
Wi-Fi module test accessories must cover the module’s enabled channels, power…
-
How to Troubleshoot Intermittent RF Test Fixture Contacts
Intermittent RF contacts should be investigated through controlled movement, repeated measurements…
-
How to Use RF Terminations on Unused Fixture Ports
Terminations give unused fixture ports a defined load when required by…
-
Qualifying an RF Measurement Route for Factory Release
Accessory release should include incoming identity checks and the measurements needed…
-
Why Manual Step Attenuators Are Not Automatically Suitable for Automated Lines
A manual step attenuator provides hand-selected loss and does not imply…
-
What Is an RF Station Reference Plane?
The station reference plane is the defined interface at which a…
-
How to Estimate Attenuator Heating in a Production RF Route
Attenuator heating depends on the RF power it absorbs, which is…
-
Why a Production Load Must Match the Tested RF Band
A production load must maintain suitable termination behavior across the frequencies…
-
How to Set Up RF Retest Rules Without Hiding Failures
RF retest rules should define when a new attempt is allowed…