Description
N-type DC Block – DC–6 GHz, 4000V DC
The CentronRF N-type DC block passes RF signals from DC–6 GHz while stopping DC voltage, rated to 4000V. Place it in line to protect the input of a spectrum analyser, signal generator or receiver from DC bias, or to remove DC from a line that carries power to an LNA, active antenna or amplifier.
Its 4,000 V rating makes it suitable for high-voltage environments and for isolating equipment from large DC potentials. The threaded N-type connector is the standard on spectrum analysers, signal generators, base stations and antenna systems, and it stays reliable through repeated connections.
Key features
- Blocks DC up to 4000V
- DC–6 GHz broadband RF pass-through
- Low VSWR ≤1.15, 50 Ω
- N-type male to female connectors
Applications
- Protecting spectrum analyser and signal-generator inputs from DC
- Isolating bias-tee and phantom-powered lines (LNAs, active antennas)
- Breaking ground loops between test instruments
- Cellular, Wi‑Fi and microwave lab measurements
Specifications
| Product | Coaxial DC block |
|---|---|
| Model | MANDBN4K06MF |
| Frequency range | DC–6 GHz |
| Impedance | 50 Ω |
| Max DC voltage | 4000V |
| VSWR | ≤1.15 |
| Connector | N-type male to female |
FAQ
Why do I need a DC block?
Many test instruments are damaged by even small DC voltages at their RF input. A DC block lets the RF signal through while keeping DC out.
Does the DC block affect low frequencies?
It is specified for use across DC–6 GHz. Contact us if you need the low-frequency cut-off for your application.
Why buy from CentronRF
CentronRF is the official global e-shop of Centron Microwave Components, the maker of the RF POWER, Milcom and Microwave Centron brands. You buy direct from the factory, and our team can help you choose the right part or quote custom versions and volume orders. Contact us at [email protected] or on WhatsApp +86 131 6872 5545.
